Analysis of the Causes of Motor Heating
Sep 14, 2021
As an indispensable and important power provider in people's production and life, three-phase asynchronous motors are widely used in general occasions and without special needs for metal cutting machine tools, pumps, fans, transportation machinery, mixers, agricultural machinery and food machinery, etc. Mechanical equipment with explosive or corrosive gases. In the process of use, many motors will have serious heat, but many people do not know how to deal with it. More importantly, what is the cause of the motor heat should be the first to grasp during use. Let's take a Get up and learn about the common reasons why your electric motor heats up badly.
First of all, when using the motor, due to overloading or overloading, the motor will have a fever during operation. This is a very strict definition. If the motor is not used in accordance with the approved tonnage of the motor, then it is not only in the process of using the motor. The service life of the motor is shortened, and the more serious it will cause the safety failure of the motor.
Secondly, in the process of use, when the motor is started and reversed very frequently, the motor will have a serious fever. This is because when the starting current of the motor is 5 to 7 times of normal operation, the frequent forward and reverse rotation will keep the motor under 5 to 7 times of the starting current for a long time, thus making the motor very hot.
Third, due to the abnormal operation of the motor cooling fan, it will also cause heat generation during the use of the motor. As we all know, the largest heat dissipation during the use of the motor is the cooling fan of the motor itself. The reason for frequent maintenance will cause the cooling fan to not work properly, that is, it cannot exert its own cooling function.
Fourth, due to the mechanical equipment failure caused by the motor, the load is too heavy, which makes the motor overload and causes the electric vehicle to heat up seriously.
Therefore, when using the motor for production and daily use, we must pay attention to these detailed issues, that is, when using it, follow the operating specifications, and also ensure daily inspection and maintenance, which must be done in production, as long as these Only when the product is inspected and maintained can it be profitable in the production process.







